MFT Card Design Superstar contest – Coloring Virtuoso 2020

Hello, and welcome back to my blog, my crafty friends. I love participating in the SuperStar Challenge organised by My Favorite Things. It is an amazing contest, and it helps me think out of the box and be more creative with my stamps. I made this card for the Coloring Virtuoso Contest using 13 stamp sets.

A short story behind this card –
I haven’t visited my family in over two and a half years, and this year I had planned to visit them in time for my sister’s birthday so that I could throw her a surprise party. Life, however, had other plans, and because of the travel restrictions imposed now, I had to tweak my birthday surprise. While thinking of ways to make up for missing my sister’s birthday, I thought of this card, which would be our way of living the surprise I had planned for her, until next year when I will be able to throw her that well-deserved party. And so, I made a card depicting the surprise birthday scene and tried to capture all the hushed excitement, behind-the-scenes planning, and fun and frolic, before the big “SURPRISE” shout out. I tried to show two different rooms in my card – the bedroom with my sister (who just woke up, oblivious to the surprise in store for her) and me in it, and the dining/living room with my family and my sister’s friends preparing for the surprise party. 

My sister loves the colour pink so much that too much pink is never a thing for her. Hence, pink is the main focus of the card, especially in the bedroom. Also, lately, we both have been fascinated with the big floral decals, and so I decided to add them to the bedroom wall as well. I tried to include many such things that are close to our heart, and the amazing variety of MFT stamps made it so much easier for me to make the card I envisioned. Though this car involved a lot of masking, stamping and colouring, it was all worth it to bring that million-dollar smile on my sister’s face.

I did go way out of my comfort zone to make this card, and I do hope you like it. Oh, and did you notice the naughty cat getting pulled up by the balloon and the little piggy giggling away?

I used the below stamps to create this card –
1) SY Sending Sweet Celebration Wishes Stamp Set
2) SY All Tucked In Stamp Set
3) SY Sweet Shop Stamp Set
4) SY Pawty Time Stamp Set
5) SY Scene Builder Stamp Set
6) SY Easter Bunnies Stamp Set
7) Fluttering Friends Stamp Set
8) Rose Garden Stamp Set
9) BB Our Story Stamp Set
10) SY Always Bring A Smile Stamp Set
11) Floral Focus Stamp Set
12) SY Piggy Pebbles Stamp Set
13) SY Friendly Foxes Stamp Set

Whenever I want to create a scene on my card, I start by stamping the images on a piece of printer paper. This method helps me to figure out where I want to place the images, and I can change it if I want to. Once I am happy with the placement, I stamp the images on a masking sheet, and fussy cut them with my scissors

Next, I cut a piece of Neenah Solar White 110lb Cardstock to 5 * 11 inches using my trimmer. After that, I stamped the images in the foreground on it first using Extreme Black Hybrid Ink. I then masked them and stamped the images in the background. I have mentioned the detailed process below.

Stamping for the Bedroom:
First, I stamped the slippers and the cat from the All Tucked In Stamp Set.

Next, I stamped the vase from the Our Story Stamp Set using the above guide I created as reference. Then I masked it and stamped the side table from the All Tucked In Stamp Set. I masked the fishbowl while inking the stamp, unmasked it and stamped it on the card panel.

After that, I masked the side table and stamped the bed image from the same stamp set and masked it.

Since I wanted to stamp the party hat on the fox from the Friendly Foxes Stamp Set, I masked the fox from the Sending Sweet Celebration Wishes Stamp Set and stamped the hat, masked it and then stamped the fox from the Friendly Foxes Stamp Set.

Then I masked this image and stamped the flower from the Fluttering Friends Stamp Set behind the fox.

I wanted only the rose in the centre, so I masked the rest of the stamp and inked the rose from the Rose Garden Stamp Set, unmasked the image and stamped it on the card panel.

Next, I masked it and followed the same method for the magnolia from the Floral Focus Stamp Set. I then masked the image and stamped the rose from the Rose Garden Stamp Set behind it. After masking this rose, I stamped the tiny flower from the topmost portion of the same stamp set. Then I stamped the flower from the Fluttering Friends Stamp Set.

I then stamped the butterflies from the Always Bring A Smile and Easter Bunnies Stamp Sets

After that, I stamped the moon painting frame and the banner from the All Tucked In Stamp Set. Then I stamped the cactus from the Our Story Stamp Set

Stamping for the Dining / Living room:
I started by stamping the fox, penguin and tortoise from the Sending Sweet Celebration Wishes Stamp Set.

Then I masked the bunny from the same stamp set and stamped the party hat for the bird and the other tortoise. Next, I masked these hats and stamped the bird from the All Tucked In Stamp Set, and the tortoise from the Always Bring A Smile Stamp Set.

After masking these images, I stamped the cat from the Pawty Time Stamp Set. Since I wanted to make it look like the balloon was pulling the cat up, I cut the stamp in the centre, and tilted the cat image and kept the balloon straight. I used a sheet of Acetate on the cardstock to help me place this stamp as I wanted. Then picked it up with my Misti and stamped it.

I then masked the dog and the big gift from the Pawty Time Stamp Set and stamped the party hat. Then I masked it and stamped the pig from the Piggy Pebbles Stamp Set.

Next, I stamped the party hat of the cat from the Piggy Pebbles Stamp Set after masking the rest of the image. Then I masked this hat and stamped the little fox.

After masking the fox, I stamped the balloons from the Sweet Shop Stamp Set. Then I stamped the table with the two mice from the same stamp set.

To create the window, I first masked the images and drew the window using my Copic Multiliner pen along with my ruler. Then I masked the frame and stamped the leaves from the Always Bring a Smile Stamp Set. After that, I masked the leaves and stamped the tree from the Scene Builder Stamp Set, masked it and stamped the cloud from the same stamp set.

I then used my ruler and a Copic Multiliner pen to draw the wall and floor for both the bedroom and dining/living room. Next, I stamped the streamers from the Sweet Shop Stamp Set. Then I used my Copic Markers to colour all the images.

Below are the colours I used:
Bedroom
Slippers – RV63, V05, RV66
Cat – E39, E37, E35, E33, E31, E30, R20, R32
Vase – R85, R83, R81, RV10
Flower 1 in the vase – YR09, YR04, Y38, Y08
Flower 2 in the vase – R89, R17, R24, R22, Y08, G14, YG11
Flower 3 in the vase – Y08, Y02, G14, YG11
Side table – E55, E53, E50, BV23, BV31, B60
Book 1 – E29, E25, E23, E21, E53, E50, E31
Book 2 – BV20, BV23, BV25, E50, E53, E31
Book 3 – B97, B95, B93, B91, E50, E53, E31
Bed – E55, E53, E50
Bunny – W3, W2, W1, W00, R30, R000
Bunny’s clothes – BG49, BG13, Bg11, BG10
Mattress and bedsheet – Y15, Y13, Y000
Pillow – Y15, Y13, Y000, N3, N1, N0, 0
Duvet – R83, R81, RV10, RV000
Teddy bear – E29, E25, E23, E21, R21, R000
Piggy – R32, R30, R11, R00
Fox – N9, N7, N5, N3, N2, N1, N0, R30, R000
Fox’s party hat – R89, R39, R27, R24, R22
Flower in fox’s hand – R27, Y08, Y02, YR09, YR04, Y38, Y08, Y02, G17, G14, YG13
Yellow Flowers – Y15, Y13, Y000
Pink Flowers – R83, R81, RV10, RV000, Y15, Y13, Y000
Butterfly 1 – BG49, BG13, BG11, BG10
Butterfly 2 – V06, V04, V01, V000
Moon painting – E49, E47, E44, E21, Y08, Y02, Y0000, V06, V04, V01, B12, B00, 0, Sakura White Gelly roll pen
Cactus – G28, G07, G05, YG11, YG00, C5, C3, C1, C0, YG03
Cactus stand – E49, E47, E44
Banner – E44, E43, N5, N3, N1, N0, 0, R85, R83, R81
Wall – E43, E41
Carpet – R89, R85, R83, R81, RV10

Dining/living room
Fox 1 – E18, E08, YR07, YR16, YR15, W3, W1, W00, 0
Fox 1’s party hat – BG18, BG49, BG13, BG32, BG11, BG10
Gift in fox 1’s hand – G28, G17, G14, YG13, YG11, E99, YR24, Y08, Y02
Tortoise 1 – G07, G05, G00, E47, E44, E43, E41
Tortoise 1’s party hat – R89, R85, R83, R81
Flower in Tortoise 1’s hand – N3, N2, N0, 0, Y08, Y00, G14, YG11, Y02
Tortoise 2 – E29, E25, E23, E21, G14, YG13, YG11
Tortoise 2’s party hat – B97, B95, B93, B91
Whistle – R27, R21
Bird – Y19, Y15, Y06, Y02, Y11, Y00, Y000, YR09, YR09, YR04, Y38, Y08, R27, R21
Bird’s party hat – BG53, BG57, BG49, B00, B0000
Teddy bear in bird’s hand – R21, R00, 0
Fox 2 – N5, N3, N1, N0, 0, RV00, RV000
Fox 2’s party hat – R89, R39, R27, R24, R22, R21, Sakura White Gelly roll pen
Balloon 1 – E93, RV000, RV10, R73, R81, 0
Balloon 2 – E95, E93, YR0000, 0
Balloon 3 – R83, R81, RV10, Y26, 0
Kitchen table – E55, E53, E50, BV23, BV31, B60
Mouse 1 – W2, W1, W0, W00, R02, R00, R000
Mouse 1’s party hat – E99, YR24, Y08, Y02
Mouse 1’s apron – R85, R83, R81, RV10, RV000
Mouse 2 – C3, C2, C1, C0, C00, R02, R00, R000
Mouse 2’s hat – N5, N1, N0, 0
Mouse 2’s apron – BV04, BV02, BV00, BV000, BV0000
Penguin – C9, C7, C5, C3, R00, N1, N0, 0, YR04, Y38, Y15, R27
Penguin’s party hat – BV04, BV02, BV00, BV000, BV0000
Banner in Penguin’s hand – BG18, BG13, BG32, BG11, BG10
Cat – W7, W3, W1, W0, W00, R21, R000
Cat’s party hat – YR09, YR04, Y38, Y08, Y02
Balloon tied to the cat’s tail – R24, R14, YR02, R11, 0
Pig – R32, R30, R11, R00, C7, C5, C3
Pig’s party hat – V17, V15, V12, V01
Window frame – E79
Leaves – YG67, YG21
Grass – G17, G07, YG25, YG23, YG13, G28, G24, G94
Tree – E59, E57, E44, E43, G17, G99, G94, YG63, YG25, YG13, YG00
Cloud – B91, B00, B000
Sky – B91, BV00, B00, B000, B0000
Streamers – R89, R85, R83, R81
Kitchen table – E55, E53, E50, BV31, BV23, B60
Cherries – R39, R27, R24
Cherry Bowl – V17, V15, V12
Cupcake icing – RV19, RV14, RV13, RV10
Piping bag – C5, C3, C00, RV14, RV13, RV10
Cupcakes – E79, E57, E35, E33, E31, E50
Cupcake tin – T5, T3, T0
Flour – N3, N1, 0, R89, R24, R22, R21
Measuring cup – C5, C3, C1, C00, 0
Batter – E99, YR24, Y08, Y02
Sugar – N3, N1, N0, 0 R81, RV10
Bowl – B99, B97, B95, B91, YR31, YR30, 0
Spoon – E50, E53, E31
Wall – E43, E41
Floor – BV23, BV31, B60
Wall between the 2 rooms – N3, N1, N0

After that, I wrote my sister’s name on the banner using a Copic Multiliner pen and drew in the white lines on the tiles using my Sakura White Gelly Roll pen and a ruler.

To create the card base, I cut a sheet of Neenah Solar White 110lb cardstock to 5 * 11 inches. Next, I cut another piece of cardstock to 5 1/2 * 11 inches and scored it at 1/2 inch. I then assembled these two pieces to create a card base. Lastly, I stuck the card panel on the card base using Precision Glue.

I hope you enjoyed reading the process of my card as much as I enjoyed making it.

I have listed the products used below. Thank you for visiting my Blog.

Supplies:


* This post may contain affiliate links, which means if you purchase something through the link I will receive a small commission at no extra charge to you. Thank you for your support.

Share this

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.